Geni Swing Guitars

Sitka Spruce

What to Know About the Plywood Supplies For Boat Building

Plywood is a strong material made out of many wooden sheets. This is also used as engineering material. Though not very attractive, it is extremely strong for boat making. Depending upon its thickness, plywood can resist damages.

Plywood is used in different applications including boat construction. This is a wood product made from many sheets of veneer or plies. It undergoes the process of pressing together, glued and grains going in multiple directions.

Plywood is a high quality wooded sheet that has resistance to:

•cracking
•breaking
•twisting
•warping
•bending and
•shrinkage

In boat-building, it is not practical to discuss all types of lumber. There are specific woods common in each country yet imported lumbers can also be found.

The common rule:

Any lumber in the locale that becomes successful in boat-making can be applied.

Although there are some characteristics of the wood that need to be considered like:

•weight
•strength
•decay resistance

Look for wood that will match these requirements. If the boat designer wants a lightweight lumber like Sitka Spruce, do not give him white oak. It would double the weight of Sitka Spruce. White oak weighs heavier. Weight will affect the performance of the boat. You can use woods of similar weight and strength as substitute. They must also prove to be successful for boat making.

In buying Lumber

Determine first the required thickness of wood material to be used. The designer must note in the plan or material listing the specific lumber thickness. The thickness of the lumber is usually the first dimension. It is called the sided dimension. For practicality, the designer must give specific standard for lumberyard dimensions like:

•1" material refer to four quarters or
•1" material to 1" NET

When asking for a quotation, note these to your lumber supplier. You can also purchase just one big board and re-saw them into desired pieces to save money.

Example:

Specified three 1" x 2" members, group these together. You can cut this from one big board sized 1" x 6" + extra allowance.

To re-saw this board, you will need a power saw. It can be a:

•table saw or
•radial arm saw

In Selecting Lumber

Select the actual board to use after deciding on the type of lumber. Wide width is mostly preferable. Long length is advantageous. When the plan needs a member 20' long but the available is only 12', it can be formed by:

•Scarf joint or
•Butt joint

The builder must check his plan to assure that the joint be found at a strategic location.

Example:

By using a butt joint and butt lock, a two 10' length can be used to make 20' member. It is probable that the joint be found in the location of the hull. It has stern curvature that will make the joint more difficult to make. On the other hand, 12' and 8' length makes 20' member also. It could be manipulated to locate the joint outside curvature. It will simplify the joint.

To select appropriate material, the builder must check all choices against the plan. The lumber for boat making project must be seasoned. It means removing moisture from the wood. It is done to improve its purpose.

The two methods of lumber seasoning are Air drying and Kiln drying. The characteristics of the two methods:

1. Air drying process

•It is the best process
•It requires year or more of drying time

2. Kiln drying process

•It is acceptable if done correctly
•It can leave more moisture in the wood if rushed or
•It removed too much moisture in the wood that makes it brittle if cooked

If it is cooked, the wood will no longer be suitable for boat building. And, if the wood contains much moisture after seasoning, the wood will shrink or split. If possible, select boards that have vertical grain also called edge grain or rift sawn stock. These boards expand and contract without too much distortion.

Look for lumber defects

Defects must be checked. People confused with blemish as defects. Blemish affects only the appearance but not the service it gives. A defect is an irregularity on the wood that may affect strength. It is sometimes limited to a certain area only. It can be cut away.

Two types of defects:

•Those caused by seasoning
•Those caused by the way of tree growth

Seasoning defects are caused by removing moisture and shrinkage. Common seasoning defects include checking and warping. Natural defects caused by growth depend on the species of lumber.

Common natural defects are:

•knots
•cross-grain in wood
•shake
•decay and rot

About the Author

For more information on
Plywood Boat Building
and
Plywood Supplies
please visit our website.

A Lumberman Tops a Sitka Spruce $39.99 W. E. Garrett A Lumberman Tops a Sitka Spruce - Photographic Print

Clouds over a Sitka Spruce Forest $39.99 David Edwards Clouds over a Sitka Spruce Forest - Photographic Print

Sitka Spruce - Oregon's Largest - Oregon Coast $19.99 Sitka Spruce - Oregon's Largest - Oregon Coast - Premium Poster

Cone and Branch of Sitka Spruce, Point Adolphus $39.99 Michael Melford Cone and Branch of Sitka Spruce, Point Adolphus - Photographic Print

Sitka Spruce, Siuslaw National Forest, Oregon, USA $29.99 Charles Gurche Sitka Spruce, Siuslaw National Forest, Oregon, USA - Photographic Print

Devil's Club, Sitka Spruce Forest, and Ferns, Alaska $34.99 Rich Reid Devil's Club, Sitka Spruce Forest, and Ferns, Alaska - Photographic Print

Raindrops Glisten on Clusters of Cones on a Sitka Spruce Tree $39.99 Michael Melford Raindrops Glisten on Clusters of Cones on a Sitka Spruce Tree - Photographic Print

Bedell OH-18 Parlor Solid Sitka Spruce Acoustic Guitar Gloss Natural $999 Bedell OH-18 Parlor Solid Sitka Spruce Acoustic Guitar Gloss Natural

Bedell TB-18 Dreadnought Solid Sitka Spruce Acoustic Guitar Gloss Natural $999 Bedell TB-18 Dreadnought Solid Sitka Spruce Acoustic Guitar Gloss Natural

Bedell MB-18 Orchestra Solid Sitka Spruce Acoustic Guitar Gloss Natural $999 Bedell MB-18 Orchestra Solid Sitka Spruce Acoustic Guitar Gloss Natural

Bedell Tb-18 Dreadnought Solid Sitka Spruce Acoustic Guitar Gloss Natural $999 Bedell TB-18 Dreadnought Solid Sitka Spruce Acoustic Guitar Gloss Natural

Bedell Mb-18 Orchestra Solid Sitka Spruce Acoustic Guitar Gloss Natural $999 Bedell MB-18 Orchestra Solid Sitka Spruce Acoustic Guitar Gloss Natural

Bedell Oh-18 Parlor Solid Sitka Spruce Acoustic Guitar Gloss Natural $999 Bedell OH-18 Parlor Solid Sitka Spruce Acoustic Guitar Gloss Natural

Used Martin Dc16gte Ae Sitka Spruce Top 7/10 $999.99 In Store Used USED MARTIN DC16GTE AE SITKA SPRUCE TOP 7/10

8.5' x 62 Dura-Lit Sitka Spruce 950 Clear Lights $1175.99 8.5' x 62" Dura-Lit Sitka Spruce Tree 950CL 2835TLit with 950 Clear From our Sitka Spruce Tree series Type: Christmas Trees & Accessories Color: Multi-Color

Used Breedlove Sj25/R A/E W/Case (Sitka Spruce/Indian Rosewood) $1399.99 In Store Used USED BREEDLOVE SJ25/R A/E W/CASE (SITKA SPRUCE/INDIAN ROSEWOOD)

Used Taylor (E) Ns24ce Clsc Ga Solid Sitka Spruce $799.99 In Store Used USED TAYLOR (E) NS24CE CLSC GA SOLID SITKA SPRUCE

Used Taylor Gs Sitka Spruce/Indian Rosewood W/Ohsc $1399.99 In Store Used USED TAYLOR GS SITKA SPRUCE/INDIAN ROSEWOOD W/OHSC

Sitka spruce, Morning Fog, Olympic National Park, Washington, USA $39.99 Charles Gurche Sitka spruce, Morning Fog, Olympic National Park, Washington, USA - Photographic Print

Trail Through Temperate Rainforest of Sitka Spruce in Bartlett Cove $39.99 Rich Reid Trail Through Temperate Rainforest of Sitka Spruce in Bartlett Cove - Photographic Print

Mist Settles Atop Sitka Spruce Trees Along the Shores of Rudyerd Bay $39.99 Steve And Donna O'Meara Mist Settles Atop Sitka Spruce Trees Along the Shores of Rudyerd Bay - Photographic Print

Sitka Spruce Forest at Fort Abercrombie State Park, Alaska $34.99 Rich Reid Sitka Spruce Forest at Fort Abercrombie State Park, Alaska - Photographic Print

Sitka Spruce Trees in a Forest, Ecola State Park, Oregon, USA $129.99 Panoramic Images Sitka Spruce Trees in a Forest, Ecola State Park, Oregon, USA - Wall Decal

Old growth cedar, hemlock, fir and Sitka spruce forest in fall $19.99 John and Yva Eastcott And Momatiuk Old growth cedar, hemlock, fir and Sitka spruce forest in fall - Photographic Print