Reverb Amplifier
![]() |
Reverb for Dubstep
Reverb is used to create atmosphere and depth (back and forward, more pushes the sound back, less puts the sound in front of the sound space). Reverb is a complicated and creative tool. Reverb is usually best placed on a bus channel, and then you can send parts of each channel to the same reverb using the FX sends. This will save on processing power and mean all your sounds appear like they are coming from the same space. Power Tip: To get your reverb setting in time with your track, dived the 60,000 by the tempo, Then either use that number or divide by 2. So a tempo of 140 = 60,000 / 140 = 428 or 4.28 (milliseconds).
You can either use that setting of 4.28 but usually that will create to much reverb for dance music, so a shorter snappier setting of 2.14 (ms) (half of 4.28) will work better. That number is applied to the 'reverb time' setting, and will mean that the reverb tails fall just in time for the next sounds. This is very handy in nearly all production. I would tend to EQ the bus were the reverb is (after the reverb plug in) using a low shelf starting at 360hz down to 20hz at about 4db reduction. This will remove any muddiness to the reverb and clean up the overall tone of the mix a little. Using automation on reverb is also a favorite, can be used very creatively, especially in the 16 bar fills and before the drop to create massive sounds, try using this technique on a reversed symbol before the drop, followed by a clean normal cymbal on the 1st beat of the 1st bar of the track. You can also use reverb in reverse on a vocal to create a space aged effect. First reverse the vocal, then add reverb, then reverse the vocal again, so it plays normally.
You will hear the reverb trails before the vocal. A well used, but still effective tip. Reverb sounds really good on snares, sawtooth leads (especially when heavily compressed like Benny Benassi), hi-hats and nearly all higher pitched sounds. I would not really use reverb on bass ever, how ever you can experiment, and would only use a tiny amount, if any on kick drums. If you like the reverb sound while the instrument is playing, but don't want any of the trails after the instrument finished you can use a gated reverb. You patch your effect processor to a gate and the sound source is side chained to the gate.
That way, the gate opens and lets the reverb out whenever the part plays, but cuts off as soon as the sound level dips below the threshold of the gate. Check out this website were you can upload audio and it will processed in a real reverb chamber and sent back to you, makes a change over using 'fake' reverbs silophone.net/You can find reverb processors in other places as well, if you have the guitar rig plug in you can use that on the bus, with just the reverb, and maybe even a amp simulator to play the reverb for an interesting effect.
Listen
The last part is to listen carefully to your dubstep mix for the last time before printing your track to a file. Its a good idea to take a break of a few hours before doing this. You should be looking out for peaks above 0DB and other anomalies. Are all the parts sounding defined and in there own space, be critical as mistakes at this stage can be rectified. Once its gone to production there is no way to get it back Be Lucky- Take some risk and get your tracks out there! With persistence, learning and talent you will make it. Believe in yourself.
Check out some cool Dubstep Loops and other Dubstep Samples Here
|
|
Fender '65 Deluxe Reverb Amplifier Cover $19.99 Fender '65 Deluxe Reverb Amplifier Cover |
|
|
Vintage Fender 1966 Super Reverb Blackface Amplifier 4X10 40 Watts $1899.99 In Store Vintage VINTAGE FENDER 1966 SUPER REVERB BLACKFACE AMPLIFIER 4X10 40 WATTS |
|
|
Kona KA35R 35Watt 2Channel Guitar Amplifier with Reverb $163.2 Distortion button with separate gain and level knobs. 3band EQ. Reverb Knob. Headphone jack. 10 Speaker. Line out. |
|
|
Chord CG-15 8 Guitar Amplifier with Overdrive & Reverb $89.9 The Chord CG-15 is a compact guitar amplifier that's suitable for both beginners and advanced guitar players. The home-amplifier features an adjustable overdrive, hardware reverb, and a 3-band equalizer, giving you everything you need to rock out at home! Despite the amps design, the CG-15 Chord is most suitable for use as a home and practice amp, and can also be used for small auditions. Compact dimensions, lightweight, and its mobile design allow you to easily transport the amp to school or to the rehearsal room. Thanks to the option of connecting headphones, you can comfortably practice privately without waking the neighbors. Additionally, the AUX input allows you to easily connect external sound sources such as MP3 and CD players. |
|
|
Stagg 60GARUSA Spring Reverb Guitar Amplifier 60W/110V $209.93 The 60 W RMS 2-channel Guitar Amplifier with spring reverb is a 1 x 12" speaker. With 2 channels (clean/overdrive) that have independent volume controls this amp is wonderful for any guitarist! Stagg offers precise, reliable and sharp-looking amplifiers. Every single function will respectfully enhance your sound. Established in 1995, Stagg is a brand dedicated to bringing high quality musical instruments and accessories to musicians of all types, at the most attractive prices. |
|
|
Chord CG-30 Electric Guitar Amplifier Overdrive Reverb 30W $112.9 The Chord CG-30 is a powerful amplifier for advanced rock guitar players. The amplifier comes fully equipped with adjustable overdrive, reverb and a 3-band equalizer, allowing you to create the perfect sound to compliment the amp's vintage design. The Chord CG-30's sonic possibilities can be expanded even further by connecting an external effects device to the amplifier. The headphone socket allows you to practice quietly, while the AUX input lets you connect external audio devices such as MP3 and CD players directly to the amp. |
|
|
Amplifier $12.49 Amplifier |
|
|
Chord CG-60 Electric Guitar Amplifier 2 Drive Reverb FX $169.9 The Chord CG-60 is an electric guitar amplifier with Rock in mind and its eyes on the stage. The amp's Rock characteristics are evident with its fully controllable drive channel that produces the perfect stage sound. Even more sounds can be created thanks to the amp's connections, allowing you to bring in effects pedals and foot switches. Its integrated AUX input allows you to connect external audio devices such as MP3 and CD players and also makes it easy to practice or play along with a backing track. The Chord CG-60s sturdy cabinet and metal protective corners mean it is the perfect amplifier for traveling and touring. |
|
|
Behringer Virtube 30W Guitar Amplifier $142.99 This guitar amplifier features a 10" Bugera speaker to disperse your music to an audience and a digital FX processor to customize your tone with reverb, flanger and delay effects. |
|
|
Fender Custom Vibrolux Reverb-Amp Combo 886830129797 $959.99 Turn it up when you want to soar, or turn your guitar down to play clean with the super-responsive, all-tube Fender Custom Vibrolux Reverb-Amp Combo. The more dynamic your style, the more you'll love the Custom Vibrolux Reverb's ability to whisper or scream in reply to changes in your pick attack. Connoisseurs call this combo amplifier the "Little Vibro-King!"40W is loud enough for any club, and provides just the right punch in the studio, too. 2 - 10" Jensen alnico-magnet P10R speakers reproduce that fullness of tone for virtually any application. Clean, the Custom Vibrolux is punchy and full. With distortion, its punchy bass and horn-like midrange make this amp ideal for sustained and scorching solos.Both channels (Normal, Bright) have access to the tube reverb and vibrato, which you can control with the included 2-button footswitch.The Custom Vibrolux Revert-Amp Combo was designed in the Fender Amp Custom Shop and built on the regular tube amp line in the U.S.40W tube power2 - 6L6 Groove Tube output tubes5 - 12AX7 preamp tubesOne 12AT7 reverb/vibrato tube2 x 10" Jensen P10R speakers with alnico magnets2 independent channels (Normal and Bright)Reverb (both channels)Vibrato (both channels)External speaker jack (4 ohms)2-button footswitchTilt-back legsMade in the U.S. |
|
|
Fender Custom Vibrolux Reverb-Amp Combo $1043.99 Turn it up when you want to soar, or turn your guitar down to play clean with the super-responsive, all-tube Fender Custom Vibrolux Reverb-Amp Combo. The more dynamic your style, the more you'll love the Custom Vibrolux Reverb's ability to whisper or scream in reply to changes in your pick attack. Connoisseurs call this combo amplifier the "Little Vibro-King!"40W is loud enough for any club, and provides just the right punch in the studio, too. 2 - 10" Jensen alnico-magnet P10R speakers reproduce that fullness of tone for virtually any application. Clean, the Custom Vibrolux is punchy and full. With distortion, its punchy bass and horn-like midrange make this amp ideal for sustained and scorching solos.Both channels (Normal, Bright) have access to the tube reverb and vibrato, which you can control with the included 2-button footswitch.The Custom Vibrolux Revert-Amp Combo was designed in the Fender Amp Custom Shop and built on the regular tube amp line in the U.S.40W tube power2 - 6L6 Groove Tube output tubes5 - 12AX7 preamp tubesOne 12AT7 reverb/vibrato tube2 x 10" Jensen P10R speakers with alnico magnets2 independent channels (Normal and Bright)Reverb (both channels)Vibrato (both channels)External speaker jack (4 ohms)2-button footswitchTilt-back legsMade in the U.S. |
|
|
Fender Custom Vibrolux Reverb-Amp Combo 886830222313 $959.99 Turn it up when you want to soar, or turn your guitar down to play clean with the super-responsive, all-tube Fender Custom Vibrolux Reverb-Amp Combo. The more dynamic your style, the more you'll love the Custom Vibrolux Reverb's ability to whisper or scream in reply to changes in your pick attack. Connoisseurs call this combo amplifier the "Little Vibro-King!"40W is loud enough for any club, and provides just the right punch in the studio, too. 2 - 10" Jensen alnico-magnet P10R speakers reproduce that fullness of tone for virtually any application. Clean, the Custom Vibrolux is punchy and full. With distortion, its punchy bass and horn-like midrange make this amp ideal for sustained and scorching solos.Both channels (Normal, Bright) have access to the tube reverb and vibrato, which you can control with the included 2-button footswitch.The Custom Vibrolux Revert-Amp Combo was designed in the Fender Amp Custom Shop and built on the regular tube amp line in the U.S.40W tube power2 - 6L6 Groove Tube output tubes5 - 12AX7 preamp tubesOne 12AT7 reverb/vibrato tube2 x 10" Jensen P10R speakers with alnico magnets2 independent channels (Normal and Bright)Reverb (both channels)Vibrato (both channels)External speaker jack (4 ohms)2-button footswitchTilt-back legsMade in the U.S. |
|
|
Fender Custom Vibrolux Reverb-Amp Combo 886830241932 $959.99 Turn it up when you want to soar, or turn your guitar down to play clean with the super-responsive, all-tube Fender Custom Vibrolux Reverb-Amp Combo. The more dynamic your style, the more you'll love the Custom Vibrolux Reverb's ability to whisper or scream in reply to changes in your pick attack. Connoisseurs call this combo amplifier the "Little Vibro-King!"40W is loud enough for any club, and provides just the right punch in the studio, too. 2 - 10" Jensen alnico-magnet P10R speakers reproduce that fullness of tone for virtually any application. Clean, the Custom Vibrolux is punchy and full. With distortion, its punchy bass and horn-like midrange make this amp ideal for sustained and scorching solos.Both channels (Normal, Bright) have access to the tube reverb and vibrato, which you can control with the included 2-button footswitch.The Custom Vibrolux Revert-Amp Combo was designed in the Fender Amp Custom Shop and built on the regular tube amp line in the U.S.40W tube power2 - 6L6 Groove Tube output tubes5 - 12AX7 preamp tubesOne 12AT7 reverb/vibrato tube2 x 10" Jensen P10R speakers with alnico magnets2 independent channels (Normal and Bright)Reverb (both channels)Vibrato (both channels)External speaker jack (4 ohms)2-button footswitchTilt-back legsMade in the U.S. |
|
|
Used Fender Custom Vibrolux Reverb-Amp Combo $1043.99 Turn it up when you want to soar, or turn your guitar down to play clean with the super-responsive, all-tube Fender Custom Vibrolux Reverb-Amp Combo. The more dynamic your style, the more you'll love the Custom Vibrolux Reverb's ability to whisper or scream in reply to changes in your pick attack. Connoisseurs call this combo amplifier the "Little Vibro-King!"40W is loud enough for any club, and provides just the right punch in the studio, too. 2 - 10" Jensen alnico-magnet P10R speakers reproduce that fullness of tone for virtually any application. Clean, the Custom Vibrolux is punchy and full. With distortion, its punchy bass and horn-like midrange make this amp ideal for sustained and scorching solos.Both channels (Normal, Bright) have access to the tube reverb and vibrato, which you can control with the included 2-button footswitch.The Custom Vibrolux Revert-Amp Combo was designed in the Fender Amp Custom Shop and built on the regular tube amp line in the U.S.40W tube power2 - 6L6 Groove Tube output tubes5 - 12AX7 preamp tubesOne 12AT7 reverb/vibrato tube2 x 10" Jensen P10R speakers with alnico magnets2 independent channels (Normal and Bright)Reverb (both channels)Vibrato (both channels)External speaker jack (4 ohms)2-button footswitchTilt-back legsMade in the U.S. |
|
|
Reverb Ringtone $10 Reverb Ringtone |
|
|
Marshall 50W Combo Guitar Amplifier $749.99 This all-valve combo guitar amplifier features a 2-channel design with overdrive boost for enhanced tone. The effects loop and foot-switchable spring reverb let you customize your sound. |
|
|
Reverb $15.59 No Synopsis Available |
|
|
Randall Minion Series 15W Practice Amplifier $89.99 This practice amplifier features built-in spring reverb for enhanced tone and gain, volume, distortion and EQ controls to customize your sound. The headphone output lets you practice privately. |
|
|
Peavey Ecoustic E110 100W Acoustic Amplifier $349.99 Enhance your sound with this Peavey Ecoustic E110 acoustic amplifier that features a 10" full-range loudspeaker and high-frequency horn for powerful audio. Reverb, chorus and delay options allow you to get creative with your music. |
|
|
Kustom Defender 100W Combo Guitar Amplifier $999.99 This combo amplifier features volume and reverb controls along with tremolo and vibrato circuits to help you achieve a distinctive tone. The 2 Celestion Vintage 30 speakers deliver powerful sound to your audience. |
|
|
Kustom Defender 50W Combo Guitar Amplifier $799.99 This combo amplifier features a 12AX7 preamp tube with EL34 power tubes to deliver distinctive all-tube tones. The built-in tone and reverb controls let you dial in a customized sound. |
|
|
Used Fender Custom Vibrolux Reverb-Amp Combo 886830129797 $959.99 Turn it up when you want to soar, or turn your guitar down to play clean with the super-responsive, all-tube Fender Custom Vibrolux Reverb-Amp Combo. The more dynamic your style, the more you'll love the Custom Vibrolux Reverb's ability to whisper or scream in reply to changes in your pick attack. Connoisseurs call this combo amplifier the "Little Vibro-King!"40W is loud enough for any club, and provides just the right punch in the studio, too. 2 - 10" Jensen alnico-magnet P10R speakers reproduce that fullness of tone for virtually any application. Clean, the Custom Vibrolux is punchy and full. With distortion, its punchy bass and horn-like midrange make this amp ideal for sustained and scorching solos.Both channels (Normal, Bright) have access to the tube reverb and vibrato, which you can control with the included 2-button footswitch.The Custom Vibrolux Revert-Amp Combo was designed in the Fender Amp Custom Shop and built on the regular tube amp line in the U.S.40W tube power2 - 6L6 Groove Tube output tubes5 - 12AX7 preamp tubesOne 12AT7 reverb/vibrato tube2 x 10" Jensen P10R speakers with alnico magnets2 independent channels (Normal and Bright)Reverb (both channels)Vibrato (both channels)External speaker jack (4 ohms)2-button footswitchTilt-back legsMade in the U.S. |
|
|
Used Fender Custom Vibrolux Reverb-Amp Combo 886830222313 $959.99 Turn it up when you want to soar, or turn your guitar down to play clean with the super-responsive, all-tube Fender Custom Vibrolux Reverb-Amp Combo. The more dynamic your style, the more you'll love the Custom Vibrolux Reverb's ability to whisper or scream in reply to changes in your pick attack. Connoisseurs call this combo amplifier the "Little Vibro-King!"40W is loud enough for any club, and provides just the right punch in the studio, too. 2 - 10" Jensen alnico-magnet P10R speakers reproduce that fullness of tone for virtually any application. Clean, the Custom Vibrolux is punchy and full. With distortion, its punchy bass and horn-like midrange make this amp ideal for sustained and scorching solos.Both channels (Normal, Bright) have access to the tube reverb and vibrato, which you can control with the included 2-button footswitch.The Custom Vibrolux Revert-Amp Combo was designed in the Fender Amp Custom Shop and built on the regular tube amp line in the U.S.40W tube power2 - 6L6 Groove Tube output tubes5 - 12AX7 preamp tubesOne 12AT7 reverb/vibrato tube2 x 10" Jensen P10R speakers with alnico magnets2 independent channels (Normal and Bright)Reverb (both channels)Vibrato (both channels)External speaker jack (4 ohms)2-button footswitchTilt-back legsMade in the U.S. |
|
|
Used Fender Custom Vibrolux Reverb-Amp Combo 886830241932 $959.99 Turn it up when you want to soar, or turn your guitar down to play clean with the super-responsive, all-tube Fender Custom Vibrolux Reverb-Amp Combo. The more dynamic your style, the more you'll love the Custom Vibrolux Reverb's ability to whisper or scream in reply to changes in your pick attack. Connoisseurs call this combo amplifier the "Little Vibro-King!"40W is loud enough for any club, and provides just the right punch in the studio, too. 2 - 10" Jensen alnico-magnet P10R speakers reproduce that fullness of tone for virtually any application. Clean, the Custom Vibrolux is punchy and full. With distortion, its punchy bass and horn-like midrange make this amp ideal for sustained and scorching solos.Both channels (Normal, Bright) have access to the tube reverb and vibrato, which you can control with the included 2-button footswitch.The Custom Vibrolux Revert-Amp Combo was designed in the Fender Amp Custom Shop and built on the regular tube amp line in the U.S.40W tube power2 - 6L6 Groove Tube output tubes5 - 12AX7 preamp tubesOne 12AT7 reverb/vibrato tube2 x 10" Jensen P10R speakers with alnico magnets2 independent channels (Normal and Bright)Reverb (both channels)Vibrato (both channels)External speaker jack (4 ohms)2-button footswitchTilt-back legsMade in the U.S. |
|
|
Fender 65 Princeton Reverb 15W 1x10 Tube Guitar Combo Amp Black $899.99 The Fender '65 Princeton Reverb Amp is an authentic all-tube reproduction of the original classic! The Princeton Reverb amplifier delivers 15W through one 10" Jensen Special Design speaker. This single-channel amplifier favorite has 2 inputs, reverb and vibrato effects with an included footswitch, and control knobs for Treble, Bass, Reverb, Speed, and Intensity. The tube complement consists of a trio of 12AX7s, a 12AT7, dual Groove Tubes 6V6s, and a single 5AR4 rectifier tube. The Fender Priceton Reverb combo is covered with tough vinyl, and Fender ships the reverb amp with a vinyl dust cover.Amp Type: Vintage Reissue Series Tube AmpOutput: 15 watts into 8 ohmsTubes: 3 x 12AX7, 1 x 12AT7, 2 x Groove Tubes 6V6, 1 x 5AR4 rectifier tubeSpeaker: 1-10" Jensen Special Design C-10RChannel: 1 channel (2 inputs)Controls: Volume, Treble, Bass, Reverb, Speed, IntensityEffects: Reverb, VibratoCovering: Black textured vinyl |
|
|
Fender 65 Princeton Reverb 15W 1x10 Tube Guitar Combo Amp Black 886830336225 $719.99 The Fender '65 Princeton Reverb Amp is an authentic all-tube reproduction of the original classic! The Princeton Reverb amplifier delivers 15W through one 10" Jensen Special Design speaker. This single-channel amplifier favorite has 2 inputs, reverb and vibrato effects with an included footswitch, and control knobs for Treble, Bass, Reverb, Speed, and Intensity. The tube complement consists of a trio of 12AX7s, a 12AT7, dual Groove Tubes 6V6s, and a single 5AR4 rectifier tube. The Fender Priceton Reverb combo is covered with tough vinyl, and Fender ships the reverb amp with a vinyl dust cover.Amp Type: Vintage Reissue Series Tube AmpOutput: 15 watts into 8 ohmsTubes: 3 x 12AX7, 1 x 12AT7, 2 x Groove Tubes 6V6, 1 x 5AR4 rectifier tubeSpeaker: 1-10" Jensen Special Design C-10RChannel: 1 channel (2 inputs)Controls: Volume, Treble, Bass, Reverb, Speed, IntensityEffects: Reverb, VibratoCovering: Black textured vinyl |



US $1,570.00


































































































