Pedal Footswitch
 |
![DIGITECH FS3X FOOTSWITCH for JAM MAN PEDAL MORE 2949]](http://www.geniswing.com/images/e/130699047600_0.jpg)
 NEW DIGITECH JAMMAN SOLO JMS LOOPER GUITAR PEDAL W FREE FS3X FOOTSWITCH  US $179.65
|
 Line 6 FBV Shortboard MKII Guitar Footswitch Pedal US $150.00
|
The Ampeg BA 210 SP bass amplifier is a decent bass amplifier and will most likely be fine for the average bass player. The bass amp by Ampeg has two ten inch speakers in the cabinet, and is a combo amplifier. This means that the speaker cabinet and the amplifier head are combined into one, which makes it much easier to move and generally to transport. Despite the fact that this bass amplifier wasn't very large, I still found it mildly difficult to move, because of it's weight, despite the wheels. It weighs around 76 pounds, so it's still pretty heavy (especially if you had to constantly bring it up several flights of stairs, like I did).
This Ampeg amp also comes with a foot switch pedal that can let you change between two or three effects. It has a large amount of effects options for the bass players interested in various effects. As far as sound and power goes, this amplifier outputs 220 watts maximum.
The sound itself was great. It has a recognizable Ampeg sound that is produced when playing with this amp. Furthermore, the sound was strong, crisp, and quality - a sound that all bass players strive for.
In short, the Ampeg 210 bass amplifier [http://www.guitarampreviews.net/2008/06/19/ampeg-ba210-sp-review/] is a bass amplifier that most bassists would likely enjoy using. I found it suitable for smaller gigs, but i think that it would still do decently well on larger gigs. No large gigs, per say, but it would be okay for small and medium gigs, though if you were planning on playing outdoors for a concert I'd personally make sure it's okay.
The author is the owner of a site where you can buy used guitars [http://www.buyusedguitars.net] online.
|
|
Voodoo Lab Pedal Switcher Guitar Footswitch $219 Voodoo Lab Pedal Switcher Guitar Footswitch |
|
|
Used Behringer Fs112b 2-Button Ultrabass Pedal, Footswitch 0419 $19.99 In Store Used USED Behringer FS112B 2-Button Ultrabass Pedal, Footswitch 0419 |
|
|
Korg PS1 Momentary Footswitch Sustain Pedal $39.58 This rugged momentary footswitch features a metal housing, rubber footpad and comes with an attached cable. It can be used with any Korg product equipped with a 1/4" footswitch jack. It function will vary depending on the product, and the settings inside that product. The PS1 can also be connected to the damper pedal jack of any korg keyboard. |
|
|
Used Behringer Fs112t Heavy-Duty 2-Button Ultrabass Pedal, Footswitch 0419 $19.99 In Store Used USED Behringer FS112T Heavy-Duty 2-Button Ultrabass Pedal, Footswitch 0419 |
|
|
Korg PS3 Mementary Footswitch Sustain Pedal $26.04 This low-cost pedal can be used for sustain when connected to the damper input of Korg keyboards. It can also be used for the assignable footswitch jack on Korg products, where it will provide various functions depending on the product's settings. The PS3 features a tough, molded plastic body with a non-slip rubber base. |
|
|
Hammond EXP-100F Expression Pedal $192.92 Expression pedal for the Hammond XK-3 and XE-1 with footswitch. |
|
|
Hammond Exp-100F Expression Pedal $212 Expression pedal for the Hammond XK-3 and XE-1 with footswitch. |
|
|
Hammond EXP-100F Expression Pedal 886830279621 $106 Expression pedal for the Hammond XK-3 and XE-1 with footswitch. |
|
|
Marshall Footswitch for MGDFX Amps $32.99 The Marshall PEDL-90004, 2 Way Footswitch (Channel and DFX) is for the MG50DFX, MG250DFX, MG100DFX and MG100HDFX amplifiers.Standard two pedal CHANNEL change and FX, Reverb On/Off pedal which works with the majority of amplifiers on the market today.A must have for any gigging guitarist2 way footswitchWorks with Marshall MG50DFX, MG100DFX, MG100HDFX and MG250DFXSwitches channel and FX on and off |
|
|
Marshall Footswitch For Mgdfx Amps $32.99 The Marshall PEDL-90004, 2 Way Footswitch (Channel and DFX) is for the MG50DFX, MG250DFX, MG100DFX and MG100HDFX amplifiers.Standard two pedal CHANNEL change and FX, Reverb On/Off pedal which works with the majority of amplifiers on the market today.A must have for any gigging guitarist2 way footswitchWorks with Marshall MG50DFX, MG100DFX, MG100HDFX and MG250DFXSwitches channel and FX on and off |
|
|
Used Hammond Exp-100F Expression Pedal 886830279621 $106 Expression pedal for the Hammond XK-3 and XE-1 with footswitch. |
|
|
Roland DP-2 Damper Pedal $16.99 The Roland DP-2 Damper Pedal acts as amomentary footswitch for nonlatch footswitch operations such as sustaining notes on electronic keyboards. Black. |
|
|
Roland Dp-2 Damper Pedal $16.99 The Roland DP-2 Damper Pedal acts as amomentary footswitch for nonlatch footswitch operations such as sustaining notes on electronic keyboards. Black. |
|
|
Korg PS3 Single Momentary Footswitch $19.99 The low-cost Korg PS3 pedal can be used for sustain when connected to the damper input of Korg keyboards. It can also be used for the assignable footswitch jack on Korg products, where it will provide various functions depending on the product's settings. The PS3 features a tough, molded plastic body with a non-slip rubber base. |
|
|
Korg Ps3 Single Momentary Footswitch $19.99 The low-cost Korg PS3 pedal can be used for sustain when connected to the damper input of Korg keyboards. It can also be used for the assignable footswitch jack on Korg products, where it will provide various functions depending on the product's settings. The PS3 features a tough, molded plastic body with a non-slip rubber base. |
|
|
Ibanez IFS2G Two-Button Footswitch for TSA15H $29.99 Built for the Ibanez Tube Screamer TSA15H amp head, the two-button footswitch features two LEDs for indicating that the pedal has been engaged. The Ibanez footswitch activates the TSA Tube Screamer Amp's built-in tube overdrive function. The Ibanez footswitch also includes a boost activation button.Footswitch for the TSA15H Tube Screamer 15W tube guitar amp head Two buttons Two LED lights |
|
|
Ibanez Ifs2g Two-Button Footswitch For Tsa15h $29.99 Built for the Ibanez Tube Screamer TSA15H amp head, the two-button footswitch features two LEDs for indicating that the pedal has been engaged. The Ibanez footswitch activates the TSA Tube Screamer Amp's built-in tube overdrive function. The Ibanez footswitch also includes a boost activation button.Footswitch for the TSA15H Tube Screamer 15W tube guitar amp head Two buttons Two LED lights |
|
|
Line 6 FBV2 Footswitch $34.99 Don't feel like carrying around a full-sized footcontroller? The Line 6 FBV2 lets you scroll through the first bank of four presets and is small and light enough to fit in your gig bag. With its ultra-reliable switches and aluminum case, the FBV2 can take all the abuse you can throw at it.Compatible Products:Spider ValveSpider III*Spider II*Flextone IIIVettaVetta IIHD147POD 2.0***FBV2 is not compatible with Spider II 15 or Spider III 15.**FBV2 is only compatible with POD 2.0 units with pedal jacks labeled "FBV Pedal." It is not compatible with older units which have pedal jacks labeled simply "Pedal."(NOTE: FBV2 is NOT compatible with Ax212, Flextone I, II or HD, POD Pro, Bass POD, Bass POD Pro and SpiderScrolls through Channels A,B,C, & DSelf-powered though the locking cable |
|
|
Yamaha FC5 Sustain Footswitch $19.99 Perfect for any application that requires a nonlatching momentary switch - use it as a keyboard sustain pedal or as a punch-in switch for hard disk recorders and more. 5' cable gives you plenty of room to move.5' cable1/4" phone plug |
|
|
Line 6 Fbv2 Footswitch $34.99 Don't feel like carrying around a full-sized footcontroller? The Line 6 FBV2 lets you scroll through the first bank of four presets and is small and light enough to fit in your gig bag. With its ultra-reliable switches and aluminum case, the FBV2 can take all the abuse you can throw at it.Compatible Products:Spider ValveSpider III*Spider II*Flextone IIIVettaVetta IIHD147POD 2.0***FBV2 is not compatible with Spider II 15 or Spider III 15.**FBV2 is only compatible with POD 2.0 units with pedal jacks labeled "FBV Pedal." It is not compatible with older units which have pedal jacks labeled simply "Pedal."(NOTE: FBV2 is NOT compatible with Ax212, Flextone I, II or HD, POD Pro, Bass POD, Bass POD Pro and SpiderScrolls through Channels A,B,C, & DSelf-powered though the locking cable |
|
|
Yamaha Fc5 Sustain Footswitch $19.99 Perfect for any application that requires a nonlatching momentary switch - use it as a keyboard sustain pedal or as a punch-in switch for hard disk recorders and more. 5' cable gives you plenty of room to move.5' cable1/4" phone plug |
|
|
Crate CFS1 1 Button Footswitch $19.59 The CFS1 is a single foot pedal for selected Crate box mixers and keyboard amps. |
|
|
Crate Cfs1 1 Button Footswitch $19.59 The CFS1 is a single foot pedal for selected Crate box mixers and keyboard amps. |
|
|
Carl Martin Route Box Double A/B Footswitch $189 So you're out on a gig playing both acoustic and electric guitar, and want to use the same effects pedalboard, but don't want to keep plugging and unplugging your instruments. The solution simple, thanks to the Carl Martin Route Box footswitch. The double A/B footswitch pedal routes 2 guitars to either of two amps. Simply connect the 2 guitars to the Carl Martin Route Box's instrument inputs, and plug the route box output into your pedalboard. Connect the pedalboard into the Route Box input, and back out to your amp. You can even plug into an additional amplifier for even more control of each instrument's sound. The Carl Martin Route Box's amp select footswitch keeps the two instruments, two amps, and one pedalboard routed and dedicated.Pedalboard input/output Instrument 1 and 2 input Amp 1 and 2 output Instrument select footswitch Amp select footswitch |
