Geni Swing Guitars

Glass Slide

One of the best magic tricks that go around at bars is the sucking glass trick. This trick involves attempting to pour beer into the glass without coming in contact with the beer. The equipment required to carry out this trick includes a glass pint that is empty, an ashtray, beer, matchbox and a single coin.

Once you have all the equipment collected and ready, start off by pouring a thin layer of beer in the ashtray. Then take the coin and place it in the middle of the beer. Thereafter, produce a matchstick from the matchbox you have. Light the matchstick up and place it on the coin in the horizontal position. Now place the empty glass upside down on the small setup you just made. Within a few seconds, you will see the beer being sucked into the glass. The working principal behind this trick is the vacuum that is created which forces the beer to pour in the glass.

Another popular trick out of the set of best magic tricks is pushing the glass. The ideology of this trick is to push a glass through the beer handle without touching the handle itself. For this trick you require a small sized glass, a straw and a beer mug.

Once all the required equipment is collected, simply take the straw and push it through the handle of the beer mug. Once this is done, push the glass through along with the straw. Therefore, you are able to push the glass through the beer glass handle without any of the two glasses coming in contact.

Oliver Bridge is termed to be another popular trick. This trick involves passing an olive over an obstruction and into a glass of whiskey. The equipment you require for this trick includes an olive, a glass for brandy, a straw and three whiskey tumblers.

Construct the setup of this trick by setting up the olive near the brandy glass on the bar. Take two whiskey glasses and place them upside down at a distance of six inches from the olive. Place the straw on the glasses such that it acts as a hurdle to the olive. Place the last glass faced up at a distance of six inches from the hurdle you constructed.

Place the brandy glass in the flipped position on top of the olive and start rotating it around such that the olive starts to slide against the walls of the glass. Increase the speed of rotation such that the olive continues to rotate inside the walls of the glass even if you lift it up. Start pushing the brandy glass towards the hurdle. Once you are near the hurdle, lift the glass up without decreasing the speed of rotation. Take the brandy glass over the hurdle and hold it over the whiskey glass you placed face up. Stop the rotation and the olive will fall into the glass.

Corker is another one of the best magic tricks. This involves trying to slip the cork from the mouth of the bottle without damaging the bottle glass. To perform this trick, you require a wine bottle, a silk scarf and a cork.

Cap the empty wine bottle with the cork and hold the silk scarf diagonally by two of its corners. The central part of the scarf is guided on to the bottle without releasing the corners. Hold the bottle in the horizontal position and place the scarf on the cork such that the loop created by the scarf grips the cork. Simply pull the cork out without damaging the wine bottle.

There are many other magic tricks that you can perform besides the ones mentioned above. However, mastering these best magic tricks requires practice or else you could end up in an embarrassing situation in front of people.

How would you like to learn the best Magic Tricks for Beginners and quickly become a very skilled magician?
Go here now to find out how: http://www.cardsandmagictricksforbeginners.com

Dicro Slide Sample Set $24.95 A Revolutionary Way to Use Dichroic. No glass cutting necessary, simply cut with scissors or use a hole punch. The creative possibilities are endless. Best of all, Dicro Slide has no COE and is compatible with all glass. It can be fired between layers of glass or on top of glass. Sample set includes all six colors on 2 x 2 squares, all clearly labeled, along with a handy instruction sheet. To use Dicro Slide 1. Cut out your design 2. Soak the piece(s) in water for 1 to 2 minutes 3. Blot excess water and slide onto your glass 4. Smooth out and fuse according to full fuse firing schedule for the given COE. Delphi Tip When using with a coated glass, such as dichroic or iridized, make sure to layer with clear glass, giving the Dicro Slide an uncoated glass surface to adhere to. Projects below made with dicro slide. Artists Jaime Dobson and Jen Olsen created the orange tile and butterfly bowl. Set of three multi-layered tiles by GlassHopper Patterns.

Dicro Slide Pack $55.95 A Revolutionary Way to Use Dichroic. No glass cutting necessary, simply cut with scissors or use a hole punch. The creative possibilities are endless. Best of all, Dicro Slide has no COE and is compatible with all glass. It can be fired between layers of glass or on top of glass. Pack includes four 4 square sheets in assorted colors, all at a discounted price. To use Dicro Slide 1. Cut out your design 2. Soak the piece(s) in water for 1 to 2 minutes 3. Blot excess water and slide onto your glass 4. Smooth out and fuse according to full fuse firing schedule for the given COE. Scenic tile created by artist Patti Curtin, image courtesy of GlassHopper Patterns. Artists Jen Olsen and Jaime Dobson created the orange tile and elegant black bowl shown below. Artist Chris Thurber of Goodyear, AZ completed this fun fused dog with a Dichro Slide heart. Set of three multi-layer tiles courtesy of GlassHopper Studios. Colors in pack may vary, photo is one example.

Creative Images Color Slide $16.95 Favorite color photographs or works of art can become part of your next masterpieces. Imagine adding color designs to your stained glass, mosaic or ceramic projects. Use pictures from clip art, the Internet, photos, even your children and 39;s artwork. Simply print your design from a color laser printer or *color copier. Then soak in water, slide onto glass and bake at 376 degrees Fahrenheit to secure your design. 10 sheets, 8-1/2 x 11 each. Includes step-by-step instructions. To view, click on View User Manual. Artist Karina Foster added bird artwork to glass with Color Slide (shown above). Artist Julie Haan created the turkey panels shown below. Basket of Flowers panel shown below was made by artist Kayleigh McGrath using Creative Images Color Slide and the basket cluster 443243. J necklace project created with Creative Images Color Slide and completed with clip art from Floral and Fairies Art Sheet 87328 and tube bail 704023. Creative Images Color Slide bottle project shown below created by artist Kayleigh McGrath. *Note Works with color copiers, including commercial models. Not compatible with inks from All-in-One style Inkjet copier/printers.

Dicro Slide Frit $24.95 Works with All Glass COE and 39;s Use Dicro Slide frit to create dazzling designs without worrying about glass COE. This amazing paper product works with any fusible glass. Best of all, no glass cutting necessary. Each package contains a .4 oz mixture of coatings for a dichroic rainbow effect. To use Dicro Slide Frit 1. Arrange Dicro Slide frit on glass base 2. Cover with clear 3. Fire - adding a hold time to burn off the carrier coat per manufacturers directions (included) Delphi Tip This product must be fired in between glass layers or its dichroic coating may burn off. Make your own dichroic coasters like the one below created by artist Georgia Speelman. It and 39;s easy with Delphi and 39;s pre-cut fusible glass. Blue pendant created by artist Melanie Churchill. Artist Val Oswalt created a pendant in minutes using DG3 Art Gel Glaze (item 89401) and Silver Deep Pendant Plate (item 85412).

Dicro Slide Magenta Green 4 X 4 $9 A Revolutionary Way to Use Dichroic. No glass cutting necessary, simply cut with scissors or use a decorative craft punch. The creative possibilities are endless. Note how it changes colors depending on angle in butterfly bowl below. Best of all, Dicro Slide has no COE and is compatible with all glass. It can be fired between layers of glass or on top of glass. Measures 4 x 4. To use Dicro Slide 1. Cut out your design 2. Soak the piece(s) in water for 1 to 2 minutes 3. Blot excess water and slide onto your glass 4. Smooth out and fuse according to full fuse firing schedule for the given COE. See image below of Rainbow Dicro Slide fired onto (left to right) black, white and clear glass. The top half of each piece of glass is uncapped. The bottom half is capped in clear. Finished projects by Jen Olsen and Jaime Dobson.

Dicro Slide Blue Gold 4 X 4 $9 A Revolutionary Way to Use Dichroic. No glass cutting necessary, simply cut with scissors or use a decorative craft punch. The creative possibilities are endless. Note how it changes colors depending on angle in butterfly bowl below. Best of all, Dicro Slide has no COE and is compatible with all glass. It can be fired between layers of glass or on top of glass. Measures 4 x 4. To use Dicro Slide 1. Cut out your design 2. Soak the piece(s) in water for 1 to 2 minutes 3. Blot excess water and slide onto your glass 4. Smooth out and fuse according to full fuse firing schedule for the given COE. See image below of Rainbow Dicro Slide fired onto (left to right) black, white and clear glass. The top half of each piece of glass is uncapped. The bottom half is capped in clear. Finished projects by Jen Olsen and Jaime Dobson.

Dicro Slide Cyan Copper 4 X 4 $9 A Revolutionary Way to Use Dichroic. No glass cutting necessary, simply cut with scissors or use a decorative craft punch. The creative possibilities are endless. Note how it changes colors depending on angle in butterfly bowl below. Best of all, Dicro Slide has no COE and is compatible with all glass. It can be fired between layers of glass or on top of glass. Measures 4 x 4. To use Dicro Slide 1. Cut out your design 2. Soak the piece(s) in water for 1 to 2 minutes 3. Blot excess water and slide onto your glass 4. Smooth out and fuse according to full fuse firing schedule for the given COE. See image below of Rainbow Dicro Slide fired onto (left to right) black, white and clear glass. The top half of each piece of glass is uncapped. The bottom half is capped in clear. Finished projects by Jen Olsen and Jaime Dobson.

Dicro Slide Clear Red 4 X 4 $9 A Revolutionary Way to Use Dichroic. No glass cutting necessary, simply cut with scissors or use a decorative craft punch. The creative possibilities are endless. Note how it changes colors depending on angle in butterfly bowl below. Best of all, Dicro Slide has no COE and is compatible with all glass. It can be fired between layers of glass or on top of glass. Measures 4 x 4. To use Dicro Slide 1. Cut out your design 2. Soak the piece(s) in water for 1 to 2 minutes 3. Blot excess water and slide onto your glass 4. Smooth out and fuse according to full fuse firing schedule for the given COE. See image below of Rainbow Dicro Slide fired onto (left to right) black, white and clear glass. The top half of each piece of glass is uncapped. The bottom half is capped in clear. Finished projects by Jen Olsen and Jaime Dobson.

Dicro Slide Rainbow 4 X 4 $14.95 A Revolutionary Way to Use Dichroic. No glass cutting necessary, simply cut with scissors or use a decorative craft punch. The creative possibilities are endless. Note how it changes colors depending on angle in butterfly bowl below. Best of all, Dicro Slide has no COE and is compatible with all glass. It can be fired between layers of glass or on top of glass. Measures 4 x 4. To use Dicro Slide 1. Cut out your design 2. Soak the piece(s) in water for 1 to 2 minutes 3. Blot excess water and slide onto your glass 4. Smooth out and fuse according to full fuse firing schedule for the given COE. See image below of Rainbow Dicro Slide fired onto (left to right) black, white and clear glass. The top half of each piece of glass is uncapped. The bottom half is capped in clear. Finished projects by Jen Olsen and Jaime Dobson.

Dicro Slide Solid Scrap Pack - Small $33.95 A Revolutionary Way to Use Dichroic. No glass cutting necessary, simply cut with scissors or use a hole punch. The creative possibilities are endless. Best of all, Dicro Slide has no COE and is compatible with all glass. Use scrap packs as an excellent way to add variety to your projects. Solid pack is perfect for customized designs. Includes a total of 32 square inches of Slide. Photo is one example, assortments will vary. To use Dicro Slide 1. Cut out your design 2. Soak the piece(s) in water for 1 to 2 minutes 3. Blot excess water and slide onto your glass 4. Smooth out and fuse according to full fuse firing schedule for the given COE. Projects below made with dicro slide. Artists Jaime Dobson and Jen Olsen created the orange tile and butterfly bowl. Set of three multi-layered tiles by GlassHopper Patterns.

Dicro Slide Solid Scrap Pack - Large $63.95 A Revolutionary Way to Use Dichroic. No glass cutting necessary, simply cut with scissors or use a hole punch. The creative possibilities are endless. Best of all, Dicro Slide has no COE and is compatible with all glass. Use scrap packs as an excellent way to add variety to your projects. Solid pack is perfect for customized designs. Includes a total of 64 square inches of Slide. Photo is one example, assortments will vary. To use Dicro Slide 1. Cut out your design 2. Soak the piece(s) in water for 1 to 2 minutes 3. Blot excess water and slide onto your glass 4. Smooth out and fuse according to full fuse firing schedule for the given COE. Projects below made with dicro slide. Artists Jaime Dobson and Jen Olsen created the orange tile and butterfly bowl. Set of three multi-layered tiles by GlassHopper Patterns.

Dicro Slide Cobblestone Pattern 4 X 4 $16.95 Make Your Own Dichroic Decals. Create incredible designs with craft scissors and paper punches using Dicro Slide™. No glass cutting is necessary, simply cut Dicro Slide to the desired shape and apply. The creative possibilities are endless. Best of all, Dicro Slide has no COE and is compatible with all glass. It can be fired between layers of glass or on top of glass. 4 x 4. Patterns shift in colors of fire and earth. Colors may vary. Imagine the possibilities with patterns. Mix and match patterns or layer patterns with solid colors for designs with incredible depth. Photo of glass tiles below courtesy of GlassHopper Patterns. Three samples to the far right are shown fired on black, white, and clear glass. Shown uncapped (top) and capped with clear (bottom). To use Dicro Slide 1. Cut out your design 2. Soak the piece(s) in water for 1 to 2 minutes 3. Blot excess water and slide onto your glass 4. Smooth out and fuse according to full fuse firing schedule for the given COE. Quilt tiles by artist Georgia Speelman. Image courtesy of Glass Patterns Quarterly (Summer 2008).

Dicro Slide Pattern Scrap Pack - Small $37.95 Make Your Own Dichroic Decals. Create incredible designs with craft scissors and paper punches using Dicro Slide™. No glass cutting is necessary, simply cut Dicro Slide to the desired shape and apply. The creative possibilities are endless. Best of all, Dicro Slide has no COE and is compatible with all glass. It can be fired between layers of glass or on top of glass. Scrap packs are an excellent way to add variety to your projects. Pack includes a total of 32 sq inches in various sizes, shapes, patterns and colors. Photo is one example, assortments will vary. Imagine the possibilities with patterns. Mix and match patterns or layer patterns with solid colors for designs with incredible depth. See the sparkling designs made with dichroic patterns in the glass tile below. To use Dicro Slide 1. Cut out your design 2. Soak the piece(s) in water for 1 to 2 minutes 3. Blot excess water and slide onto your glass 4. Smooth out and fuse according to full fuse firing schedule for the given COE.. Quilt tiles by artist Georgia Speelman. Image courtesy of Glass Patterns Quarterly (Summer 2008).

Dicro Slide Pattern Scrap Pack - Large $66.95 Make Your Own Dichroic Decals. Create incredible designs with craft scissors and paper punches using Dicro Slide™. No glass cutting is necessary, simply cut Dicro Slide to the desired shape and apply. The creative possibilities are endless. Best of all, Dicro Slide has no COE and is compatible with all glass. It can be fired between layers of glass or on top of glass. Scrap packs are an excellent way to add variety to your projects. Pack includes a total of 64 sq inches in various sizes, shapes, patterns and colors. Photo is one example, assortments will vary. Imagine the possibilities with patterns. Mix and match patterns or layer patterns with solid colors for designs with incredible depth. See the sparkling designs made with dichroic patterns in the glass tile below. To use Dicro Slide 1. Cut out your design 2. Soak the piece(s) in water for 1 to 2 minutes 3. Blot excess water and slide onto your glass 4. Smooth out and fuse according to full fuse firing schedule for the given COE. Quilt tiles by artist Georgia Speelman. Image courtesy of Glass Patterns Quarterly (Summer 2008).

Dicro Slide Clear Red 3-1/5 X 8 $19 A Revolutionary Way to Use Dichroic. No glass cutting necessary, simply cut with scissors or use a hole punch. The creative possibilities are endless. Note how it changes colors depending on angle in butterfly bowl below. Best of all, Dicro Slide has no COE and is compatible with all glass. It can be fired between layers of glass or on top of glass. Color shifts to Burgandy/Deep Red. Sheet size 3.2 x 8. To use Dicro Slide 1. Cut out your design 2. Soak the piece(s) in water for 1 to 2 minutes 3. Blot excess water and slide onto your glass 4. Smooth out and fuse according to usual firing schedule. See image below of Clear Red Dicro Slide fired onto (from left to right) black, white and clear glass. The top half of each piece of glass is uncapped. The bottom half is capped in clear. Finished projects by Jen Olsen and Jaime Dobson.

Dicro Slide High Cyan/ Copper Red 4 X 4 $10 A Revolutionary Way to Use Dichroic. No glass cutting necessary, simply cut with scissors, pinking shears, or use a decorative craft punch. The creative possibilities are endless. Note how it changes colors depending on angle in butterfly bowl below. Best of all, Dicro Slide has no COE and is compatible with all glass. It can be fired between layers of glass or on top of glass. Measures 4 x 4. To use Dicro Slide 1. Cut out your design 2. Soak the piece(s) in water for 1 to 2 minutes 3. Blot excess water and slide onto your glass 4. Smooth out and fuse according to full fuse firing schedule for the given COE. See image below of Rainbow Dicro Slide fired onto (left to right) black, white and clear glass. The top half of each piece of glass is uncapped. The bottom half is capped in clear. Finished projects by Jen Olsen and Jaime Dobson.

Fused Glass Flowers Hardware Kit $17.95 Create beautiful bouquets and show stopping garden accents. Finish glass art created with Creative Paradise flower molds. Easy-to-install hardware fits your glass and gives a professional look to your flowers. Includes eighteen 1/4 washers, 10 feet of bendable 1/4 copper tubing and seven screws. Click View User Manual for instructions. A Delphi Exclusive. For use with flower molds 806131, 806132, 806133, 806134, 806135, 806136, 806137, 806138 and 806139. Step-By-Step Attaching A Stem Step 1 Cut tubing to your desired length. Slide screw through hole of glass flower. Step 2 Using a screwdriver, twist screw into copper tubing. Screw will tighten into the sides of tubing, giving your fused flower a secure fit. Step 3 Glue cabochon onto head of screw to create flower center. Shape tubing to your liking and display. Images courtesy of Creative Paradise.

Kraftyblok 5-1/2 Clear Glass Block $9.95 Glass Blocks That Will End Creator and 39;s Block Today. This versatile glass block provides endless creative craft possibilities. The smooth, clear glass surface is ideal for mosaics, painting, etching or other decorative effects. Add small clear or colored lights to make projects that absolutely glow. The outer dimensions of KraftyBlok Mini are 5-1/2 x 5-1/2 x 3-3/4 (size approximate). A stoppered opening converts the KraftyBlok into one of many practical applications in the home. Create Savings Bank Floral Vase Night Lights Holiday Projects and Decorations Picture Box Bookends and more. Shown below are fun projects made with the KraftyBlok. First three project images courtesy of Diamond Tech. KraftyBlok lamp was made by artist Kayleigh McGrath using Creative Images™ Color Slide 8303.

Kwik Crimp $8.95 Slide a foiled piece of glass through this durable plastic crimper. In one easy stroke the foil is burnished on both sides.

Cutters Mate Strip Pro Attachment $79.95 Make Exact Strips in Seconds Create perfect strips quickly and easily. The Strip Pro attaches directly to the Cutter and 39;s Mate Slide Bar (not included). The Strip Pro offers grid adapters and a CSG-10 carbide cutting head. Oil by dip method if desired. Also features a 24 zero marked ruler for accurate convenient cuts (see image below) and an Omni-Directional Glass Stop. Works with the Cutter and 39;s Mate slide bar, 23 Slide Bar (item 5129) and the 35 Slide Bar (item 5130) for longer scores.

Speed Balls $8.95 Cutting With Grid Work Surfaces Just Got Easier Waffle Grid Surfaces are a favorite among glass artists. Use these handy Speed Balls to cut glass effortlessly on the grid surface. Place Speed Balls on your grid and in line with your score to easily slide glass. Use the included rubber cap to reposition your Speed Balls in the grid. Pack includes 12 Speed Balls and 2 caps.

2 Fiber Strips - 12 Feet $7.95 Pre-cut strips of 1/8 fiber paper are ideal for lining Hot Brix, Fire Damz and stainless steel rings when creating custom castings. Convenient size is also ideal for jewelry artist; you can place small strips in between layers of glass to create a slide pendant or to keep the hole in fusible bails open after firing. They can also be used to create designs in small fused glass projects. Measures 2 wide x 12 and 39; long (144 inches). Slide pendant below created by artist Karina Foster. Ornaments created by artist George Ayars.

Knurled Thumb Nut For W100 $5.95 Knurled nut secures tips to Weller W100 iron. Simply slide soldering iron tip through the opening, then screw onto the threaded end of the iron.

Ernie Ball Glass Slide Small $4.99 Ernie Ball Glass Slide Small

Ernie Ball Glass Slide Large $7.49 Ernie Ball Glass Slide Large

Ernie Ball Glass Slide Medium $6.99 Ernie Ball Glass Slide Medium

17 Votive Bottle Hanger $11.95 Set the mood by turning your glass bottles into art. Made of heavy gauge steel and copper plated. 17 high. Includes glass cup and tea light candle. Painted bottle project shown below created by artist Robin Dempsey. Mosaic bottle project shown below created by artist Julie Haan. Creative Images Color Slide bottle project shown below created by artist Kayleigh McGrath.

Creative Images Tile And Frame Kit $14 Create custom wall art. It and 39;s easy with this all inclusive kit. Simply print favorite images, special sentiments or whimsical designs onto the Creative Image color Slide. Then soak in water and apply to our clear crafting glass tiles. Add silver backing and frame. A Delphi Exclusive Kit includes 10 Black Solid Wood Rectangle Frame 1-7/8 Clear Tiles – 4 Pieces Creative Images™ Color Slide 2 Aluminum BriteBak Tape – 3ft. Project Sheet Project shown by Delphi Artist Karina Foster. Please Note Color slide works with color laser printers and copiers, including commercial models. Not compatible with inks from All-in-One style Inkjet copier/printers.

Circle Pendants Mold $17.95 Create Cast Glass Pendants Fill pendant molds with glass frit, scrap and powders to create one-of-a-kind cast glass jewelry. Try combining powders to create a marbled look or accent with dichroic. Use pendant molds with matching mini molds to make coordinating necklaces, bracelets and earrings. The possibilities are endless. Ceramic molds can be used many times. Coat with Primo Primer 48235. Mold makes four 1 circles. Actual mold measures 3 3/4 square. Delphi artist Keturah Esch created earrings and pendant below with 80622. Dichroic slide spiral cabochons by artist Kayleigh McGrath.

Basket Bevel Cluster $22.93 Clear bevel cluster measures 8 x 9-1/2 when assembled. 22 pieces. Delphi Tip Always lay out bevel clusters on pattern before cutting glass to adjust for small differences. Basket of Flowers panel shown below was made by artist Kayleigh McGrath using Creative Images Color Slide 8303 and the basket cluster.

Pre-cut Black Circles - 96 Coe $11.95 Use pre-cut circles for your jewelry projects, save time and create jewelry with perfect shapes. Ideal for pendants and other accessories, circles work with all 1 Alexa and Aanraku jewelry findings. Made with Spectrum Glass, circles measure approximately 1 in diameter. Sold in packs of 8. Project below created by artist Melanie Churchill using clear ( X24630) and black pre-cut circles and Dicro Slide. Second image shows circles unfinished.

Fuseworks Image Art Fusing Paper $7.95 Customize Your Glass Art With Your Own Personal Touches. All it takes is a computer and a laser printer with iron oxide based toner to print your designs, phrases and photos. Create permanent sepia toner decals for your fused art. Each package contains five 8-1/2 x 5-1/2 sheets of water-slide paper and complete fusing instructions. Images courtesy of Diamond Tech.

Silver Fan Pulls - 6 Piece Assortment $24.95 Fan pulls are a clever way to add art to any room with a ceiling fan. Pulls are 6-3/4 long so you can customize the length. Simply slide on beads, cut the wire to the desired length and create a loop at the end to secure. The included ball chain and connectors make finishing a breeze. Package includes 6 assorted design fan pulls with ball chain and connectors. Photo is one example. Silver plated finish. Blue and white glass beads fan pull below created by George Ayars.

Pre-cut Black Circles - 90 Coe $11.95 Use pre-cut circles for your jewelry projects, save time and create jewelry with perfect shapes. Ideal for pendants and other accessories, circles work with all 1 Alexa and Aanraku jewelry findings. Made with Bullseye Glass, circles measure approximately 1 in diameter. Sold in packs of 8. Project below created by artist Melanie Churchill using clear ( 24630) and black pre-cut circles and Dicro Slide. Second image shows circles unfinished.

5-1/2 Easel Stand $33.95 Gallery Quality Stand to Complement Your Art High-quality stand displays your glass art bowls and panels beautifully. Use as a table top display or mounted to a wall. Stand measures 5-1/2 high x 6 wide x 2-1/2 deep. Holds pieces up to 8 diameter. Black wrought iron finish. Fused finished project created by Jen Olsen. Dichroic snowflakes made with Dicro Slide. Wildflower mosaic by artist Melanie Churchill.

Scoring Knife $24.95 Originally designed as a knife sharpener, the Speedy Sharp is the best kept secret of glass artists for scoring and breaking glass rods and tubes. This off-label use has produced fantastic results time after time. The tungsten carbide blade features 2 edges, doubling the life, even under heavy use. A rubber handle provides comfort and superior grip. Step-by-Step Scoring Glass Rods and Tubes (See images below) Slide sheath 1/8 to 1/4 down exposing the entire blade. Holding the knife securely, line the edge of the blade at a 45 degree angle to the glass rod or tube. Rotate around to score. Apply a few drop of water to the score line. Place thumbs about 1/2 on either side of score line. Using firm and even pressure, break down and away from you.

My Tile Kit - 1 X 1 Tiles $5 Create sophisticated jewelry, magnets, mosaics and more with original artwork or pictures. Using a laser printer, scan, print, soak, then back the water-slide transfer onto the glass surface. Kit includes eight Clear Glass Crafting Tile each measuring approximately 1 x 1 each. Kit also includes two 5-1/2 x 8-1/2 sheets of Image Art Transfer Paper and detailed instructions. My Tile Kits are as Easy as 1-2-3. Print photographs or designs on a laser printer. Soak in water before applying. Bake in your home oven. Project images courtesy of Diamond Tech.

My Tile Kit - 2 X 2 Tiles $5 Create sophisticated jewelry, magnets, mosaics and more with original artwork or pictures. Using a laser printer, scan, print, soak, then back the water-slide transfer onto the glass surface. Kit includes 4 Clear Glass Crafting Tile each measuring approximately 2 x 2 each. Kit also includes two 5-1/2 x 8-1/2 sheets of Image Art Transfer Paper and detailed instructions. My Tile Kits are as Easy as 1-2-3. Print photographs or designs on a laser printer. Soak in water before applying. Bake in your home oven. Project images courtesy of Diamond Tech.